Cost-effective Desktop Size / Fiber Capability / Group Managed Switch
The PLANET WGSD-1022C is a desktop size Layer 2 Managed Fast Ethernet Switch. It provides 8 10/100Mbps Fast Ethernet ports and 2 Gigabit TP/SFP interfaces. The compact-size design Switch not only fits into space-limited environment but also is mountable in a 19-inch rack with attached rack-mounting kits. The equipped Gigabit SFP slot makes the WGSD-1022C with capability of fiber link for distance extending and can handle extremely large amounts of data in a secured topology which is linked to a backbone or high capacity servers. The various supports of QoS mode and VLAN features make the WGSD -1022C meet the needs of SOHOs, SMBs and enterprises in effective data traffic control such as VoIP, video streaming and multicast applications. The key features are shown as below:

IP Stacking up to 8 units
802.1Q VLAN
Rapid Spanning Tree
SNMP / SNMP Trap
IGMP Snooping
SFP slots, Fiber link capability

Enhanced Layer 2 Features
The WGSD-1022C can be programmed for enhanced switch management functions, such as per port speed configuration, Port Trunk in g, VLAN, Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping. The WGSD-1022C provides Port-based VLAN, 802.1Q Tagged VLAN and the VLAN groups allowed on the WGSD-1022C will be maximally up to 255. Via support in g port trunk in g, the WGSD-1022C offers the operation of a high-speed trunk comb in in g multiple ports. It also provides four groups of up to 8 ports for trunking and support s fail-over.

Efficient Management – Stacking Management
For efficient management, the WGSD-1022C is equipped with console interface, Web interface and SNMP agent. With its built-in Web-based management, the WGSD-1022C offers an easy-to-use, platform- independent management and configuration facility. It support s standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the WGSD -1022C can also be accessed via Telnet and the console port. One of the management features of WGSD-1022C is the IP Stacking function support. It helps network managers to easily configure up to 8 switches in the same series via one single one IP address instead of connecting and setting each unit one by one.

Specification

Model WGSD-1022C
Hardware Specification
Copper Ports 8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
2 10/100/1000Base-T RJ-45 port

SFP/mini-GBIC Slots 2 SFP interface, shared with Port-9, Port-10
Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps / non- blocking
Switch Throughput 4.16 Mpps
Address Table 8K entries
Share Data Buffer 1Mbit
Maximum Frame Size 1522 Bytes packet
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
LED Power, Link/Act and speed per port
Console Interface One RS-232 DB-9 male connector for switch management
Dimension (W x D x H) 280 x 173 x 44 mm, 1U height
Power requirement 110~240V AC, 50/60Hz
Power Consumption 12.2 watts / 41BTU
Weight 1.24 kg
Layer 2 function
Management Interface Console, Telnet, Web Browser, SNMP v1 and v2c
Port Configuration Port disable / enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.

Port Status Display each port speed duplex mode, link status, Flow control status. Auto-negotiation status
VLAN Port-based VLAN, up to 49 VLAN groups
IEEE 802.1Q Tagged Based VLAN , 4K VLAN ID, up to 255 VLAN groups

Spanning Tree IEEE 802.1d, IEEE 802.1w
Link Aggregation Supports 4 groups of 8- Port trunk
QoS 4 priority queues.
Traffic classification based on Port Number, 802.1p priority, DS/TOS field in IP Packet

IGMP Snooping v1 and v2
IGMP Port / Group Policy and Static Routing Port setting

Bandwidth Control Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps

Port Mirror Both
Security MAC filtering and Binding, up to 400 rules
SNMP MIBs RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-1493 Bridge MIB
RFC-2674 Extended Bridge MIB (Q-Bridge)
RFC-2819 RMON MIB (Group 1, 2, 3 and 9)

Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base- T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control

Network Media 10Base-T – UTP/STP category 3, 4 or 5 cable
100Base-TX – UTP/STP category 5 cable
1000Base-T – UTP/STP category 5e/6 cable
1000Base-SX -